Page 1 of 1
Naomi Unversal CP pinout
Posted: Sun Mar 09, 2008 1:23 am
by OldFoo
If you mess up, push the pin back with a security torx bit (the one with a hole in the middle) and it will come loose easily without damaging anything.
Wiring Schematic:
http://kirurg.org/arcade/img/control-diagram1.pdf
Connectors & pins available from:
http://www.starcab.net/
This info is probably only valid for European/UK models?
Could use part-numbers, links to manufacturer & datasheets, alternative sources etc..
RGP: put the images somewhere else than my box incase it goes down, or KC dies(again..)?
Posted: Mon Mar 10, 2008 11:50 am
by OldFoo
Segashed sells pins and plugs for those.. as well as pre-wired looms.
Posted: Mon Aug 23, 2010 11:44 pm
by OldFoo
As far as everything I have read you can also use: "Molex Mini Fit Jr" connectors to hook up cabinet parts. I have been looking to buy a lot of the connectors and it is cost prohibitive to by like 50 of these from any of the overseas vendors.
http://www.molex.com/molex/products/fam ... troduction
Posted: Tue Aug 24, 2010 3:47 am
by OldFoo
I just got some Molex Mini Fit Jr connectors and they are not interchangeable. They are very close, but not exact. :smt013
I am still on the hunt for a local "domestic" supplier of these AMP connections.
Posted: Tue Aug 24, 2010 4:37 am
by OldFoo
Here are all of the TYCO numbers for the connectors I can find:
tyco part numbers for the amp up connectors!
9 pin male: 176276-1
9 pin female: 176297-1
10 pin male: 176277-1
10 pin female: 176298-1
12 pin male: 176278-1
12 pin female: 176299-1
2 pin male: 176271-1
2 pin female: 176292-1
the last number is the color:
1 natural, 2 red, 4 yellow, 6 blue, 9 black
male pins: 1717054-1
female pins: 1717055-1
(I found all of these on the Neo Geo forums)
Finding a US supplier that carries these are tough.
If I did not need like 50 of all of them I would just bite the bullet and buy overseas.