Ok, I'm trying to ascertain exactly what I'd need.
Naomi mobo
GDROM drive
GDROM power splitter cable
JVS/JAMMA I/O converter
(if above not Capcom)
sound amplifier
Does that about cover it?
Naomi 1 + GDROM setup in an Astro or similar JAMMA cab
I am not sure to understand what you want to say but my answer is : any atx psu does. Nevertheless power of this psu must be 350 watts or more.
Buy an extension like this :
And do that with it (see the last picture of article) : http://www.arcade-system.com/articles_h ... _naomi.htm
Buy an extension like this :
And do that with it (see the last picture of article) : http://www.arcade-system.com/articles_h ... _naomi.htm
Here's some English instructions on modding a PC power supply for a Naomi, right in this forum:
http://www.sega-naomi.com/forum/viewtopic.php?t=2301
(The instructions say to use a connector from a motherboard, but I think hacking an extension cord like above is probably a better idea.)
Alternatively, if you don't have a power supply, just buy a Naomi one instead of modding a PC one. Here's some examples on eBay (not sure if you're in the USA. You may need one for your county's power type).
Buy it now $34 + $12 shipping
Starting at 99 cents, two days left, and from Mike Simmonds (Englishman_in_Plantcity on these boards)
http://www.sega-naomi.com/forum/viewtopic.php?t=2301
(The instructions say to use a connector from a motherboard, but I think hacking an extension cord like above is probably a better idea.)
Alternatively, if you don't have a power supply, just buy a Naomi one instead of modding a PC one. Here's some examples on eBay (not sure if you're in the USA. You may need one for your county's power type).
Buy it now $34 + $12 shipping
Starting at 99 cents, two days left, and from Mike Simmonds (Englishman_in_Plantcity on these boards)
Hello I currently have a Capcom Vs SNK 2 naomi gd rom system running on a Capcom Q sound arcade cabinet.
I am only running the machine on one power supply. It seems to be working fine.
My question is, do I need another power supply? I heard that the naomi gd rom systems needs two power supplies. If so which kind? Where can I get it? And if anyone has any pictures of how the two power supplies are set up. I would like to know to see it visualized as well.
Right now it seems to be working fine but I just installed it. I, however, don't want any bad long term effects.
Thank you.
I am only running the machine on one power supply. It seems to be working fine.
My question is, do I need another power supply? I heard that the naomi gd rom systems needs two power supplies. If so which kind? Where can I get it? And if anyone has any pictures of how the two power supplies are set up. I would like to know to see it visualized as well.
Right now it seems to be working fine but I just installed it. I, however, don't want any bad long term effects.
Thank you.
Not sure I understand what you are asking, but it is normal to have the Naomi mainboard and the GDROM drive connected to the same power supply (the official cable for connecting the GDROM drive uses a splitter that connects to the power loom coming from the PSU).
The original power supply used for Naomi systems is a SUN PSU, like this one (picture taken from giz10p.co.uk):
The original power supply used for Naomi systems is a SUN PSU, like this one (picture taken from giz10p.co.uk):