Hey there,
Yesterday i got this nice Afterburner Climax Cab :
then after i looked around in the Menu a bit i restarted the game and it went well for some minutes.
However suddenly the Game freezed, so i turned the power off and waited some minutes and powered it back on.
Then i got this :
After that the game started and i got this Screen :
Error 10 ...i thought ok then, let's turn the Power off again and restart the cab, i did so and what happend is this :
i did let the os install for over an hour but it stuck at "Phase 4"
I'm totally Clueless and a Lindbergh noob
What should i do?? :smt102
Sega Lindbergh Yellow totally fails on me :-(
first you need to identify what part is the network interface. then i would take that part off carefully. use remove any socketed chips making sure you not how they plugged back in. take alot of pics of the board all during this to make sure you know how to put back.
like most of the electronics scrubbing them with soap and water. scrub any connectors that are used. then shaking most of the water off. use a hair dryer to dry this completely.
you must make sure no water exists on the cleaned board.
reassemble
like most of the electronics scrubbing them with soap and water. scrub any connectors that are used. then shaking most of the water off. use a hair dryer to dry this completely.
you must make sure no water exists on the cleaned board.
reassemble