Page 1 of 1
Namco 246 question
Posted: Tue Apr 28, 2009 8:31 pm
by OldFoo
Does anyone know (for certain) if the Namco 246 system can be used on a JVS cabinet without a JVS to JAMMA connector?
I have a Uni cab, and was thinking that this would be sweet to play in the cab.
I just don't know if it will connect directly, or if I need a converter or not.
Thanks,
Steve
Posted: Wed Apr 29, 2009 2:23 am
by OldFoo
System 246 & 256 are 100% JVS compliant. This means you can use the Namco JAMMA interface it comes with, or connect it with the 'USB' type connection to any Sega I/O.
Posted: Wed Apr 29, 2009 3:11 pm
by OldFoo
joshua3dg wrote:System 246 & 256 are 100% JVS compliant. This means you can use the Namco JAMMA interface it comes with, or connect it with the 'USB' type connection to any Sega I/O.
Thanks Joshua.
So I would connect the USB from the 246 mobo to the I/O in the cab.
Do the audio/VGA/power cables plug into the 246 mobo from the cab as well?
Posted: Wed Apr 29, 2009 4:18 pm
by OldFoo
Yes. :smt045
Posted: Wed Apr 29, 2009 4:50 pm
by OldFoo
joshua3dg wrote:Yes. :smt045
First style 246 Have different power connector
Posted: Sat May 16, 2009 5:12 am
by OldFoo
any_gt wrote:joshua3dg wrote:Yes. :smt045
First style 246 Have different power connector
I think I need one of
these to connect the power cables in the Uni cab to the Namco 246 power input.
Can anyone confirm?
If correct, does ANYONE know where I can get one of these?
Thanks,
Steve
Posted: Sat May 16, 2009 5:42 pm
by OldFoo
I can confirm that it is the correct adapter. This cable is supposed to come with the system.