Page 1 of 1
what do I need to hook this up...
Posted: Wed Jul 19, 2006 1:21 am
by OldFoo
won the golf game
$101 shipped
what harness do I need for this?
Posted: Wed Jul 19, 2006 6:59 am
by OldFoo
Japanese Amp wiring for the control panel, a USB lead from the I/O on cabinet to I/O on the control panel.
Posted: Wed Jul 19, 2006 4:05 pm
by OldFoo
AndyGeezer wrote:Japanese Amp wiring for the control panel, a USB lead from the I/O on cabinet to I/O on the control panel.
I have a Versus Cabinet harness and an analog harness...will that cover some of it? I also have the non-jamma sega i/o.
Is there anything different from the USB cable than a regular USB cable from the store?
thanks
Posted: Wed Jul 19, 2006 5:19 pm
by OldFoo
Analogue harness is not used.
The USB Type A/B cable is the same as PC one.
You just need to wire up the digital buttons, the I/O on the control panel handles the trackball.
Posted: Wed Jul 19, 2006 5:57 pm
by OldFoo
AndyGeezer wrote:Analogue harness is not used.
The USB Type A/B cable is the same as PC one.
You just need to wire up the digital buttons, the I/O on the control panel handles the trackball.
ok great! thanks!!
Posted: Thu Jul 20, 2006 1:54 am
by OldFoo
AndyGeezer wrote:Analogue harness is not used.
The USB Type A/B cable is the same as PC one.
You just need to wire up the digital buttons, the I/O on the control panel handles the trackball.
Is that the same on Monkey ball, does that mean I can connect up the CP to my Impress?
http://img.villagephotos.com/p/2004-8/809903/df.jpg
Posted: Thu Jul 20, 2006 6:28 am
by OldFoo
No monkey ball is analogue and requires the analogue wiring.
Posted: Thu Jul 20, 2006 6:33 am
by OldFoo
The analog wiring is dirt cheap, so at least it wont cost much.
