Page 1 of 1
Please answer my noobish question please
Posted: Mon Jul 21, 2008 6:02 pm
by OldFoo
Ok after about a month of waiting my Naomi setup came (yay!) and I hope to try it out after work. However I want to make sure I don't fry anything when I do it. I plan to to plug it up into 1 of two raster standard res cabs with jamma boards and Harnesses. I have a Naomi 1 mobo, Capcom I/O and the cables to hook it up. I'm merely trying to see if the game and board will start up so if you could lend me some advice it would be much appreciated
Posted: Mon Jul 21, 2008 7:37 pm
by OldFoo
Just make sure you flip the dipswitch to display on standard res. You should be just fine :smt020
Posted: Mon Jul 21, 2008 9:06 pm
by OldFoo
yay indeed! I know the feeling..
You should also check if the 5v and 12v lines coming from your JAMMA harness are not too far off base. Since you are already running JAMMA PCB's it should not be a problem, but you can never be too careful.. since it is a nice Capcom I/O and all.. :smt023
Posted: Mon Jul 21, 2008 11:34 pm
by OldFoo
Thx guys
It fired up perfectly :smt020
Posted: Mon Jul 21, 2008 11:52 pm
by OldFoo
Cool! what did you do for stereo sound? just curious :smt020 I dunno too much about the Capcom I/O does it do it?
Posted: Tue Jul 22, 2008 2:19 am
by OldFoo
In terms of stereo input-output, the Capcom I/O only acts as a volume control. It does not have a stereo amp, only a mono amp for the jamma harness.