Sega-Naomi

Hi



i have a problem with my daytona 2 ..i don't have feeback anymore on the 2 machin ..

could you tell me if you know , what things i must check first ..step after step

i thought the board controler can be the problem ..but seems working fine

can be the eeprom controler the problem ? the motor ..the sensor behind the wheel ?

the manual is not so good for explain specific problems too ( power ..connection ...)



please is someone can help me will be good cause to have daytona 2 without feedback sensation is not the best for sure



( same problem on indy 500 and sega rally )



thanks

Check if the drive board reports an error during boot up. Does the wheel move like it should on boot up?

have you checked that the motor gear is not loose as that is a common problem or even a broken belt

grantspain wrote:have you checked that the motor gear is not loose as that is a common problem or even a broken belt

NO not really check yet , i didn t know what i have to do first ....

i will do that and see and write after on the forum for help others people ...who knows



thanks so much



johann