Sega-Naomi

:smt006

I am looking for someone in the U.S. who could mod my NAMCO boards Tekken 2, 3, Tag, & Soul Calibur. What I mean by mod is solder jumper wires from the kick harness connector to the main JAMMA connector so I could eliminate the kick harness altogether. Lemme know how much you would charge. I am looking to get this done in the next coupla months :smt020

Well, what I do on mine is to still connect the plug to the kick harness and then run the wires to my customized jamma harness(instead of the buttons) to avoid soldering directly on the board...works a treat(fyi I already have the extra buttons wired into the jamma harness on normally empty pins)...

that being said, what you're wanting is really pretty easy...you could probably do it yourself, especially using same method I'm using...let me know if you wanna try it...always glad to help out...

DJ Infinity wrote::smt006

I am looking for someone in the U.S. who could mod my NAMCO boards Tekken 2, 3, Tag, & Soul Calibur. What I mean by mod is solder jumper wires from the kick harness connector to the main JAMMA connector so I could eliminate the kick harness altogether. Lemme know how much you would charge. I am looking to get this done in the next coupla months :smt020