Naomi Uni Cab Lamp

OldFoo · Post by **OldFoo** » Fri Sep 19, 2008 11:36 pm

Hi

My cab lamp is not working and its buggin the hell out of me!!!

I have chaged the starter - changed the tube - still nothing

Any ideas :smt089

OldFoo · Post by **OldFoo** » Sat Sep 20, 2008 6:59 am

Sounds like you need to replace the ballast.

OldFoo · Post by **OldFoo** » Sat Sep 20, 2008 2:13 pm

any idea how I can get hold of one of them - and how much. I am new to all this

OldFoo · Post by **OldFoo** » Sat Sep 20, 2008 5:48 pm

When you said 'starter', did you mean a small, gray cylinder? If so, that would be the ballast.

OldFoo · Post by **OldFoo** » Sat Sep 20, 2008 6:08 pm

You need a 100-110VAC ballast light assy, I might have a used one in a couple of months, but I can get them new from Sega for around ?35, but obviously a lot cheaper if you can get one from your local hardware shop.

OldFoo · Post by **OldFoo** » Sun Oct 26, 2008 11:25 am

If you get stuck I should be able to supply a working ballast/lamp unit...

OldFoo · Post by **OldFoo** » Fri May 22, 2009 9:31 pm

tecnical data of starter and tube for naomi universal ? ? thanks

starter new... but my lamp blinks :smt011

OldFoo · Post by **OldFoo** » Tue May 26, 2009 6:15 pm

If i was you id either take out the lamp and take it to a local shop and let them show you what you need. Or order a used lamp setup and put in your new bulb...

OldFoo · Post by **OldFoo** » Wed May 27, 2009 1:54 pm

resolved with lamp 18w :smt020