Page 1 of 1

Naomi Universal 'Euro' coin mech

Posted: Tue Jan 13, 2009 3:18 pm
by OldFoo
Hello all,



I need a coin mech for my Naomi in the future. Not a big deal but i just want my Naomi to be complete. I found out it was missing just after purchasing it. Didn't inspect the machine good enough because it was love at first sight. :)



Anyway, Does any electronic coin mech fit in or should i look for a specific one? All info is welcome.



Thanks, Henk.

Posted: Tue Jan 13, 2009 7:12 pm
by OldFoo
money controls c120 slots straight in

Posted: Tue Jan 13, 2009 7:36 pm
by OldFoo
Thanks a lot!

Posted: Tue Jan 13, 2009 9:01 pm
by OldFoo
money/coin controls c120 programmed to Euro seems very hard to find now. Just checked the net with no result.

Posted: Tue Jan 13, 2009 9:08 pm
by OldFoo
suzo and brent electronic can do a mech programmed to euro

i guess you have the credit board in place?

Posted: Tue Jan 13, 2009 9:15 pm
by OldFoo
Thanks and Yes, Everything else is there.

Posted: Sun Feb 08, 2009 9:51 pm
by OldFoo
Make sure you machine has the C120/S10 type mech cradle.. Some have a C220 cradle..



I have some C120's/SR3's that are marked up as UK coins and Euros but Id have to test them for accepting euros!

Posted: Mon Feb 09, 2009 9:27 am
by OldFoo
Hello Craig,



Thanks for your comment! I was able to buy a Coin Controls C120 of Ebay for Euro 30,-. It is programmed for Euro coins so that was quite conveniant. The ones you're offering on your site are cheaper but having no patience was the winning factor here. ;)



Anyway, It fitted right in so it must've been the right cradle. The only thing missing on the coin mech were those little screws that hold the mech in place but i solved that temporarily.



Do the C120 / SR3 differ hat much in size compared to the C220?



Thanks, Henk.

Posted: Mon Feb 09, 2009 9:52 am
by OldFoo
goatboy wrote:Hello Craig,



Thanks for your comment! I was able to buy a Coin Controls C120 of Ebay for Euro 30,-. It is programmed for Euro coins so that was quite conveniant. The ones you're offering on your site are cheaper but having no patience was the winning factor here. ;)



Anyway, It fitted right in so it must've been the right cradle. The only thing missing on the coin mech were those little screws that hold the mech in place but I solved that temporarily.



Do the C120 / SR3 differ hat much in size compared to the C220?



Thanks, Henk.


Yes the C220 is massive compared to the SR3/C120, I personally think a C220 was only found in the first batches of Naomi's, they changed to C120 as it is cheaper mech at the time.