Sega Astro and Naomi Help!!!

OldFoo · Post by **OldFoo** » Thu Jun 15, 2006 1:42 am

Hi guys,

I need to know where inside the cab the two black and the one orange connector plug into?

http://www.excellentcom.net/images/600- ... 0Astro.jpg

I am getting my cab shortly and i need to know if this is the right cable to use for my naomi. Im working with the seller at the moment to make sure everything is naomi ready so even if you can give me a detailed desciption of the black connectors, or better yet a good photo then that will be heaps of help!

OldFoo · Post by **OldFoo** » Thu Jun 15, 2006 7:10 am

Black one is power, you have one with +5V, +12V and Ground which exists on all Model 2/3 PSU then you have the 3.3V which is only available on the Model 3 type PSU which exists in M3 cabs and Blast City.

The Orange one is for audio, it goes to the audio amp, bascially these leads are to get the Naomi power and audio working in a Blast City cab I think.

OldFoo · Post by **OldFoo** » Thu Jun 15, 2006 8:50 am

Hi Andy, would you be able to take a picture of what this particular type of psu looks like?

OldFoo · Post by **OldFoo** » Thu Jun 15, 2006 9:41 am

Model 3 PSU aka 3.3V power supply looks like this

OldFoo · Post by **OldFoo** » Thu Jun 15, 2006 9:55 am

Thanks mate :smt007