Page 1 of 1
Pinout for Sega Rev 1 I/O
Posted: Sun Feb 14, 2010 5:56 pm
by OldFoo
Does anybody have this? Specifically where connect 1P/2P Kick buttons.
Thanks in advance!
Posted: Fri Feb 26, 2010 5:17 pm
by OldFoo
No one can tell me where to connect the kicks on a Sega Rev 1 I/O? :smt009
Posted: Fri Feb 26, 2010 6:30 pm
by OldFoo
are you talking about a jvs io or a jvs to jamma jobbie?
if your talking about a jvs io your probably better off getting a jvs loom as our going to need power to the jvs 12v and 5v inputs as well as the connectors to plug it in
or
if your talking about the jvs to jamma connector for buttons 4 and 5 im not so sure..
Posted: Sat Feb 27, 2010 12:13 am
by OldFoo
On the Jamma I/O, the pins are:
Player 1
SW1=Pin22
SW2=Pin23
SW3=Pin24
SW4=Pin25
SW5=Pin26
Player 2 are underneath these pins.
SW6-SW8 are located on the kick harness header as Pins 4-6 for P1 and Pins 8-10 for P2.