Page 1 of 1
Error 01
Posted: Sat Oct 21, 2006 1:25 pm
by OldFoo
Hi,
i have a Naomi 2 with GDROM unit that is connected with a Capcom IO Board.
On startup i get error 01.
In test mode i only see rom board although a dimm board is connected.
What can be the cause of the error, not enought power ?
George
Posted: Sat Oct 21, 2006 3:29 pm
by OldFoo
Faulty rom board, I'd check the pins on both the N2 and the rom board (in your case dimm bd).
Posted: Sat Oct 21, 2006 3:53 pm
by OldFoo
AndyGeezer wrote:Faulty rom board, I'd check the pins on both the N2 and the rom board (in your case dimm bd).
This could be, but I would make checks before declaring anything dead. What is the bios version you are using? Also, does it give you the same error when you use carts?
Posted: Sat Oct 21, 2006 6:20 pm
by OldFoo
Error 01 is normally faulty rom board, or not installed correctly rom board
Error 02 is normally BIOS related
Ideally you need to check it with a regular cart.
Posted: Sat Oct 21, 2006 6:45 pm
by OldFoo
My Bios Version: EPR 23605B
A Game ROM Board is working without problems.
Posted: Sat Oct 21, 2006 9:00 pm
by OldFoo
You have the right BIOS for a dimm board, so I'd say you have a faulty dimm board sadly.
Posted: Sat Oct 21, 2006 11:12 pm
by OldFoo
That would be unfortunate. Did it work before? If so, perhaps the memory dimms might need to be reseated.
(I'm not much of a pessimist
)