Page 1 of 1
Scud Race Twin Error 2 drive board
Posted: Thu Jul 29, 2010 4:52 pm
by OldFoo
Hi I have a scud race twin. One side says error 2 drive board failed plus no feedback. The other has no error but no force feedback. Was working yesterday. Has anyone had the same problem? Thanks Matt.
Posted: Fri Jul 30, 2010 6:10 am
by OldFoo
try Setting them up to SINGLE UNITS feedbck should come back on 1 side.
and error 2 check all cables and check if the servo board/clutch has power
Posted: Sun Aug 01, 2010 5:03 am
by OldFoo
i had a sega rally 2,same feedback set up,i kept killing the drive board on player 1 side,found the cord from the game to the wall had 2 bare wires that shorted and kept taking out the drive board 3rd time lucky.
Posted: Sun Aug 01, 2010 6:27 pm
by OldFoo
Tryed swapping drive boards and chips around and still the same fault. I noticed a wire for the steering units that goes from start button to coin mech has a split in it which has maybe shorted. Annoying that its killed both cabinets force feedback. Think i need 1 drive board and 2 steering unit boards.