Naomi & all other arcade tech questions forum
OldFoo
Post
by OldFoo » Thu Oct 26, 2006 11:14 am
Ok,
Sega JAMMA I/O
Rev A, Rev B, what's the difference????
John
OldFoo
Post
by OldFoo » Thu Oct 26, 2006 12:23 pm
Version A is the JVS 1 found in Naomi cabs, Version B is the Jamma 1.
OldFoo
Post
by OldFoo » Mon Nov 13, 2006 11:48 am
Nope,
Both JAMMA I/O's, one marked Rev A on the PCB and EPROM, and the other marked Rev B.
Any Ideas??
OldFoo
Post
by OldFoo » Mon Nov 13, 2006 1:02 pm
Then I'm stumped :smt011
OldFoo
Post
by OldFoo » Mon Nov 13, 2006 2:36 pm
I'll take some piccys tonight.
OldFoo
Post
by OldFoo » Mon Nov 13, 2006 6:36 pm
OK,
Rev A.
Rev B.
Any Help???
OldFoo
Post
by OldFoo » Mon Nov 13, 2006 7:15 pm
interesting thing...
maybe the rev.a is the sega io who has problem with gg xx, etc...
OldFoo
Post
by OldFoo » Mon Nov 13, 2006 7:37 pm
I've just noticed 2 physical differences after looking at the pictures I posted.
The Rev A board has AUTO-10 printed on it (just below the EPROM)
The 2nd difference is JP1 (next to the Cap - Again under the EPROM)
On Rev A, the jumper is set to A, and on Rev B, it's set to B.
OldFoo
Post
by OldFoo » Mon Nov 13, 2006 11:56 pm
The revision B has been updated to automatically detect whether the power is being supplied by the jamma edge or the JST connector. I think you had to plan and choose with rev. A or you might blow something. I think there are a couple of fixes as well. I think one of the fixes has to do with how coins were registered.