Help with Seat Mech

OldFoo · Post by **OldFoo** » Sun Mar 20, 2011 9:30 pm

I picked up a pair of Outrun 2 sitdown models (the twin set) anyway both seats are broken to the point they just slide backwards and forwards, anyone have a way to fix these, any pictures to show what is missing/broken would be great! looked thru manuals and doesnt show much

thanks in advance Mick

OldFoo · Post by **OldFoo** » Sun Mar 20, 2011 9:39 pm

I think you will be missing a part that is held in place with rivets, I had a ID twin with 1 side missing the bit.

OldFoo · Post by **OldFoo** » Sun Mar 20, 2011 9:40 pm

any pics you can post so i can get an idea what im missing? please

OldFoo · Post by **OldFoo** » Sun Mar 20, 2011 9:53 pm

Sorry sold that cab at xmas.

OldFoo · Post by **OldFoo** » Sun Mar 20, 2011 9:55 pm

ok thanks anyway, hopefully someone else can help

OldFoo · Post by **OldFoo** » Mon Mar 21, 2011 9:18 am

on the black lever to adjust the seat, there should be a spring pulling the lever towards the seat base.

as the lever is pulled inwards, a tooth on it locks into the seat rail.

you may find the tooth is missing, hence the reason the seat wont lock.

or the spring may be missing/broke hence no force to pull the teeth into a lock position.

hth

OldFoo · Post by **OldFoo** » Mon Mar 21, 2011 9:02 pm

okay found the missing piece (some rectangular metal block) was in the base of the cabinet under all the crap and that, anyway hit the local hardware stock for some new roll pins, and fitted it and works just like it should, all good now