Well, I picked up an Initial D Machine for cheap and decided to throw Crazy Taxi in it. Everything works fine, steering, pedals, etc. except for the shifter. It does nothing, however, the change view button puts it in Reverse. The problem here is that there is no way to put it back into drive. I assume it's an easy fix to have the shifter working for Crazy Taxi, but obviously am not sure, any help here is appreciated.
For clarification, the shifter itself works fine, used it on Initial D no probs. Just when I put in Crazy Taxi it doesn't recognize it.
Crazy Taxi in an Initial D Machine. Shifter issues
The_Chosen_One wrote:AndyGeezer wrote:Crazy Taxi and OR2/ID have different shifter pinouts
I'll download the schematics, but you're saying OR2 would be a straight drop in into my ID machine? That's pretty cool.
You would need a chihiro board and gd rom also to play OR2 so a little bit of work to do.
Shifter pinouts
Hi not sure if you managed to suss this with the wiring diagrams.
I believe the pinouts are as follows.
OR2
pin 24 Drive
pin 25 View Switch
pin 26 Reverse
CT (HR)
pin 23 Drive
pin 25 Reverse
pin 27 Jump
HTH
Setch
I believe the pinouts are as follows.
OR2
pin 24 Drive
pin 25 View Switch
pin 26 Reverse
CT (HR)
pin 23 Drive
pin 25 Reverse
pin 27 Jump
HTH
Setch