Sega-Naomi

Posted: **Thu Jun 21, 2012 10:51 am**

the right pic in this is what spec.

Posted: **Thu Jun 21, 2012 12:27 pm**

What do you know ...? it's all written

Posted: **Thu Jun 21, 2012 5:29 pm**

AMP Universal Power #176286-1 (mates with #176275-1).

http://www.te.com/catalog/pn/en/176286-1?RQPN=176286-1

http://www.te.com/catalog/pn/en/176275-1?RQPN=176275-1

Posted: **Thu Jun 21, 2012 7:15 pm**

:smt104

Posted: **Fri Jun 22, 2012 12:45 am**

this isnt a jst part?

the other two are jst

Posted: **Fri Jun 22, 2012 12:53 am**

this is the one that mates with the sega or capcom i/o i understand.

Posted: **Fri Jun 22, 2012 11:54 am**

It connects to the GD-ROM reader through another harness. The brand is AMP (owned by Tyco electronics, now TE connectivity) not JST like the other two PSU connectors.

Posted: **Fri Jun 22, 2012 11:57 am**

so what powers the i/o board

if this is the gdrom power

Posted: **Fri Jun 22, 2012 3:32 pm**

I stand corrected, in Naomi Universal cabs it powers the I/O board through harnesses NOA-60014, NOB-60043 and NOA-60023:

http://img9.imageshack.us/img9/2048/nucharnesses.jpg

The GD-ROM is powered through another harness connected to the 8-pin JST connector. But you could also use the AMP connector.

Posted: **Fri Jun 22, 2012 9:33 pm**

ok i think....

im trying to build atx to Naomi connectors

i have the naomi filter board power connectors. the power for the gdrom i have also.

i need to identify what else is needed so i can purchase some.

Sega-Naomi

need quick help on idnetifying a connector

need quick help on idnetifying a connector