Hi everyone. I recently decided to buy a Naomi Gd rom setup for my cab to play Capcom vs SNk 2. Everything is running fine except for 2p Shot 5 or the 2p Medium Kick isn't working. I'll take a few pictures and try and describe the problem as best I can-hopefully it's just a simple fix. Thanks in advance for any advice!
-I'm using a capcom I/o and I wired the kicks according to this pinout. (http://www.solvalou.com/arcade_naomicapcom.php) I'm pretty sure the wiring is correct because when I swapped in Street Fighter Zero 3(CPS2) using the same kick harness all 6 buttons work.
-On each side the 3 kicks are daisy chained to the correct ground pin.
-The I/O board is set to two players
-I tried switching out the button, but that hasn't worked. I'll try switching out the USB cable too to see if that makes a difference.
I'm thinking 2p shot 5 might go to a different pin than Zero 3 and that's why the kick harness isn't working for CVS2?
Pics:
http://imageshack.us/a/img836/8671/img0691so.jpg - I/O Board
http://imageshack.us/a/img803/411/img0688jv.jpg - 2p side button wiring
http://imageshack.us/a/img685/9171/img0694y.jpg - The game running fine
