Hi Guys
Im after a specific amp connector to connect up some model 2 driving cab control boxes that replace the coin towers.
Pic below
only need 1 for now but will need about 5 to complete everything i have planned.
could do with new units with pinns supplied but would take used items as long as there is enough wire lenght coming off them
Any help greatly appreciated
Setch
Also posted on killercabs.
Specific AMP Connectors required (pic inside)
I believe that it's this one (the connector type, anyway, not the full array)
http://catalog.tycoelectronics.com/TE/b ... 277-1&I=13
though I might be wrong.
http://catalog.tycoelectronics.com/TE/b ... 277-1&I=13
though I might be wrong.
Re: Specific AMP Connectors required (pic inside)
Here you can find affordable connectors
Https://www.allicdata.com/list.html?category_id=1434
Hope can help you
Https://www.allicdata.com/list.html?category_id=1434
Hope can help you
Re: Specific AMP Connectors required (pic inside)
Thanks for your help !
Re: Specific AMP Connectors required (pic inside)
Power connector design application processing technology data recipe method
1. Universal power connector for connecting a flexible cable to a rigid device in any structure of many configurations
2. Power connector with thermal insulation
3. Wafered power connector
4. Combined power conversion plug connectors for a wide range of sensors, actuators and power supplies, as well as data applications in automotive, industrial electronics, computer technology, consumer electronics or medical engineering.
Model: 1612898-1
1. Universal power connector for connecting a flexible cable to a rigid device in any structure of many configurations
2. Power connector with thermal insulation
3. Wafered power connector
4. Combined power conversion plug connectors for a wide range of sensors, actuators and power supplies, as well as data applications in automotive, industrial electronics, computer technology, consumer electronics or medical engineering.
Model: 1612898-1