Pinout for Sega Rev 1 I/O

OldFoo · Post by **OldFoo** » Sun Feb 14, 2010 5:56 pm

Does anybody have this? Specifically where connect 1P/2P Kick buttons.

Thanks in advance!

OldFoo · Post by **OldFoo** » Fri Feb 26, 2010 5:17 pm

No one can tell me where to connect the kicks on a Sega Rev 1 I/O? :smt009

OldFoo · Post by **OldFoo** » Fri Feb 26, 2010 6:30 pm

are you talking about a jvs io or a jvs to jamma jobbie?

if your talking about a jvs io your probably better off getting a jvs loom as our going to need power to the jvs 12v and 5v inputs as well as the connectors to plug it in

or

if your talking about the jvs to jamma connector for buttons 4 and 5 im not so sure..

OldFoo · Post by **OldFoo** » Sat Feb 27, 2010 12:13 am

On the Jamma I/O, the pins are:

Player 1

SW1=Pin22

SW2=Pin23

SW3=Pin24

SW4=Pin25

SW5=Pin26

Player 2 are underneath these pins.

SW6-SW8 are located on the kick harness header as Pins 4-6 for P1 and Pins 8-10 for P2.