6 button harness for a new net city

[OldFoo]

Hello

I ordered a 6 button wiring harness for a naomi to go into a new net city, when it came in the mail it wont plug into any molex under the panel.



i ordered the wrong part?



help please









here is the part i ordered



http://www.giz10p.co.uk/Cabinet-Parts/W ... od_85.html

[OldFoo]

Hello

I ordered a 6 button wiring harness for a naomi to go into a new net city, when it came in the mail it wont plug into any molex under the panel.



I ordered the wrong part?



help please









here is the part I ordered



http://www.giz10p.co.uk/Cabinet-Parts/W ... od_85.html

That's a Japanese wiring loom.



Do you have a Japanese loom in your cabinet already?



Molex connectors are found in US cabinets, I believe.

[OldFoo]

im not sure the pins on the cab is 4 pins across and 2 down



the wiring loom is 5 pins across and 2 down



so maybe it is u.s. ?



here is what i have in it right now



http://www.giz10p.co.uk/Cabinet-Parts/W ... d_192.html

[OldFoo]

What exactly are you trying to connect the 4x2 Japanese amp connector to in your cab? I just finished hooking up my 2L12B JPN control panel to a Naomi Uni with molex connectors and the only challenge really was the 4-6 buttons for 1P and 2P. Had to wire the Japanese 4-6 button CP 4x2 loom to my yellowish orange 3x3 molex connector in the cab. Pinout of the 3x3 molex connector was something like



456

xx4

56x



had to share a ground with the 1-3 1P loom as there was no ground in this connector... I'll double check my wiring tomorrow to be sure...



Hope this helps...

[OldFoo]

ok , i am not sure how this work on a jvs cab

because i want to use the 4th button for a jamma game * dodonpachi *

im assuming * im not really sure * that the bottom 3 buttons have to go through the jvs adapter via molex under the panel.



am i wrong?

[OldFoo]

ok figured it all out

thanks for the help