HELP HELP HELP !

OldFoo · Post by **OldFoo** » Fri Jun 27, 2008 11:34 pm

Hey guys!

I was wondering if I can get some help from all you guys. I have been slowly collecting the needed parts to run my own custom Marvel VS Capcom 2 arcade. I have most if not all the parts needed. I have a couple of questions. I have a 24 inch Samsung LCD monitor that not being used much since I upgraded to a larger one, I was wondering if I can run this monitor on my Naomi arcade? Also, I currently have Naomi motherboard, I/O converter, all the wires that connect to both hardware, kick harness and the Jamma harness witht he power supply. I have purchased it from a highly respected seller on ebay. It's not labelled completly and have decided to ditch the harness and psu and buy a brand new one with everything labelled for easy connections. Is there anything else I need beside the stuff I posted above?

thanks in advance!

OldFoo · Post by **OldFoo** » Sat Jun 28, 2008 1:43 am

You can use practically any VGA monitor with the Naomi system. All you need to do is change dip switch 1 (while system is off) to set the system to VGA mode.