Naomi Universal 'Euro' coin mech

OldFoo · Post by **OldFoo** » Tue Jan 13, 2009 3:18 pm

Hello all,

I need a coin mech for my Naomi in the future. Not a big deal but i just want my Naomi to be complete. I found out it was missing just after purchasing it. Didn't inspect the machine good enough because it was love at first sight.

Anyway, Does any electronic coin mech fit in or should i look for a specific one? All info is welcome.

Thanks, Henk.

OldFoo · Post by **OldFoo** » Tue Jan 13, 2009 7:12 pm

money controls c120 slots straight in

OldFoo · Post by **OldFoo** » Tue Jan 13, 2009 7:36 pm

Thanks a lot!

OldFoo · Post by **OldFoo** » Tue Jan 13, 2009 9:01 pm

money/coin controls c120 programmed to Euro seems very hard to find now. Just checked the net with no result.

OldFoo · Post by **OldFoo** » Tue Jan 13, 2009 9:08 pm

suzo and brent electronic can do a mech programmed to euro

i guess you have the credit board in place?

OldFoo · Post by **OldFoo** » Tue Jan 13, 2009 9:15 pm

Thanks and Yes, Everything else is there.

OldFoo · Post by **OldFoo** » Sun Feb 08, 2009 9:51 pm

Make sure you machine has the C120/S10 type mech cradle.. Some have a C220 cradle..

I have some C120's/SR3's that are marked up as UK coins and Euros but Id have to test them for accepting euros!

OldFoo · Post by **OldFoo** » Mon Feb 09, 2009 9:27 am

Hello Craig,

Thanks for your comment! I was able to buy a Coin Controls C120 of Ebay for Euro 30,-. It is programmed for Euro coins so that was quite conveniant. The ones you're offering on your site are cheaper but having no patience was the winning factor here.

Anyway, It fitted right in so it must've been the right cradle. The only thing missing on the coin mech were those little screws that hold the mech in place but i solved that temporarily.

Do the C120 / SR3 differ hat much in size compared to the C220?

Thanks, Henk.

OldFoo · Post by **OldFoo** » Mon Feb 09, 2009 9:52 am

goatboy wrote:Hello Craig,

Thanks for your comment! I was able to buy a Coin Controls C120 of Ebay for Euro 30,-. It is programmed for Euro coins so that was quite conveniant. The ones you're offering on your site are cheaper but having no patience was the winning factor here.

Anyway, It fitted right in so it must've been the right cradle. The only thing missing on the coin mech were those little screws that hold the mech in place but I solved that temporarily.

Do the C120 / SR3 differ hat much in size compared to the C220?

Thanks, Henk.

Yes the C220 is massive compared to the SR3/C120, I personally think a C220 was only found in the first batches of Naomi's, they changed to C120 as it is cheaper mech at the time.