Trouble with my crazy taxi arcade!

OldFoo · Post by **OldFoo** » Thu Oct 16, 2008 12:46 am

I have everything working like the sound,the monitor,the game works great with the naomi system.The problem is I can't get the start button,the accel& break unit,the shifter,and steering wheel to work. :smt017 Is there somethig that controles all of these at once?

OldFoo · Post by **OldFoo** » Thu Oct 16, 2008 12:57 am

Yeah the IO. Any chance you have a spare rev1 you could test in place of your actual setup?

OldFoo · Post by **OldFoo** » Thu Oct 16, 2008 1:43 pm

Also, make sure you have made all connections like this--->Crazy Taxi WD<---. :smt045

OldFoo · Post by **OldFoo** » Sun Oct 26, 2008 11:06 am

Do the service and test buttons work (not the ones on the naomi unit itself?)

The reason I ask is that not all naomi games check the link to the I/O board, some will boot without reporting I/O board not found.

OldFoo · Post by **OldFoo** » Wed Jan 14, 2009 1:25 am

I've bought another I/O board for my crazy taxi arcade,but still all the controls don't work.The test and service buttons on my arcade don't work,but the ones on my naomi system does.could there be something else that could be causing this?

OldFoo · Post by **OldFoo** » Tue Aug 11, 2009 10:28 pm

Faulty usb cable from IO to naomi?

OldFoo · Post by **OldFoo** » Wed Aug 12, 2009 12:26 am

You need to make sure that all connections are made as shown by the wiring diagram. I say this because there is a 5V 'loopback' that needs to be made as well as there may be a need to connect a coin counter. :smt045