MVSC2 Unlock Codes (In Dummy Terms Plz)

[OldFoo]

Here Ya Go As Promised. Better Late Than Never



Step 1) Power On The NAOMI And Hit The Test Button

Step 2) Push Service Credit 11 Times To Get To Game Test Mode The Press The Test Button

Step 3) Move The Joystick Down So The Arrow Points To Game Configuration Press Button 1

Step 4) Move Joystick So The Arrow Points To Demo Sound Half Then Tap In This Order Button 6 Button 3 Button 5 Button 2 Button 4 Button 1

Step 5) Move Joystick Down So The Arrow Points To Save & Exit And Press Button 1. You Should See Saving Configuration In EEPROM Then Move Joystick To Select Exit And Press Button 1 Press Test Button To Exit To Game. Let The Game Do It's Intro At The Title Screen If You Did The Code Correctly You Should See LV24 EXP009600



Step 6) Hit The Test Button

Step 7) Push Service Credit 11 Times To Get To Game Test Mode The Press The Test Button

Step Move The Joystick Down So The Arrow Points To Game Configuration Press Button 1

Step 9) Move Joystick So The Arrow Points To Damage Level Then Tap In This Order Button 5 Button 6 Button 3 Button 5 Button 2 Button 5

Step 10) Move Joystick Down So The Arrow Points To Save & Exit And Press Button 1. You Should See Saving Configuration In EEPROM Then Move Joystick To Select Exit And Press Button 1 Press Test Button To Exit To Game. Let The Game Do It's Intro At The Title Screen If You Did The Code Correctly You Should See LV48 EXP019200



Step 11) Hit The Test Button

Step 12) Push Service Credit 11 Times To Get To Game Test Mode The Press The Test Button

Step 13) Move The Joystick Down So The Arrow Points To Game Configuration Press Button 1

Step 14) Move Joystick So The Arrow Points To Continue Then Tap In This Order Button 1 Button 2 Button 1 Button 3 Button 4 Button 2

Step 15) Move Joystick Down So The Arrow Points To Save & Exit And Press Button 1. You Should See Saving Configuration In EEPROM Then Move Joystick To Select Exit And Press Button 1 Press Test Button To Exit To Game. Let The Game Do It's Intro At The Title Screen If You Did The Code Correctly You Should See LV72 EXP028800



Step 16) Hit The Test Button

Step 17) Push Service Credit 11 Times To Get To Game Test Mode The Press The Test Button

Step 18) Move The Joystick Down So The Arrow Points To Game Configuration Press Button 1

Step 19) Move Joystick So The Arrow Points To Difficulty Then Tap In This Order Button 2 Button 4 Button 3 Button 1 Button 6 Button 1

Step 20) Move Joystick Down So The Arrow Points To Save & Exit And Press Button 1. You Should See Saving Configuration In EEPROM Then Move Joystick To Select Exit And Press Button 1 Press Test Button To Exit To Game. Let The Game Do It's Intro At The Title Screen If You Did The Code Correctly You Should See LV84 EXP033600



Step 21) Enjoy Game With All Characters And Colors Unlocked!!!

[OldFoo]

Good Job dude :smt023

[OldFoo]

thanks man; I'll give it a try later tonight.

[OldFoo]

Wow. The original explanation didn't say that the weird numbers (9600, etc) were experience points. It didn't even mention the "11 coin" input! How was anybody supposed to know that? :smt102





:111

[OldFoo]

So in your eyes did i do good or no? :smt020

[OldFoo]

So in your eyes did I do good or no? :smt020

Sorry I wasn't clear enough. You did a helluva job. :smt023



This question gets asked from time-to-time with no clear answer. It's good to finally have that cleared!

[OldFoo]

Yay! Infinity do good this tyme :smt020 You're a Mod how bout' a move & sticky plz :smt020

[OldFoo]

Well, I've decided that there is either something wrong with my cart or my setup because it will not work under any circumstances for me....sigh...it actually seems like my cart will not even take xp the normal ways, so like I said most likely my cart or something...just my luck. 0_o

But great explanation nonetheless. thanks again for trying to help me out!

[OldFoo]

Hmmm,

could you take pictures of your setup? do all 6 buttons work? :smt020

[OldFoo]

Yeah; everything works and no need for pics because our suspicions were correct...I checked my wiring and found that I had connected buttons 6-8 all to button 6 on both sides...no idea why I did it originally as it's been well over a year since I wired this thing...I'm guessing for another game(it's a multi-cab so it plays jamma as well as naomi-you just plug or unplug the stuff you need on it-and I do have some very weird old jamma games by sega japan and some other oddball stuff so who knows)...

so I unpluged 7&8 on p1 side and tried your instructions again-WORKED FLAWLESS!! THANK YOU FOR ALL YOUR HELP!!!